Illustrator configurator scripting

Azrael113
Newbie
Posts: 10
Joined: Tue Jan 12, 2021 12:16 pm

Re: Illustrator configurator scripting

Post by Azrael113 » Thu Jan 14, 2021 9:01 am

Unfortunately, I can't tell. I don't see how I can test this. That's why I dropped the post here.
First, I want to make sure that switch is communicating correctly with Illustrator.
If that works, I check the scripts or calls again carefully.

Padawan
Advanced member
Posts: 292
Joined: Mon Jun 12, 2017 8:48 pm
Location: Belgium
Contact:

Re: Illustrator configurator scripting

Post by Padawan » Thu Jan 14, 2021 12:22 pm

Can you make a flow like this?
- Input folder
- Illustrator element setup to open Automatically and save as Illustrator file
- Output folder

Activate the flow and then drop an Illustrator file in there. If the connection is ok, then you should get a resaved Illustrator file in the output folder.

If this flow works, then it will be something specific to the scripts or how they are used.
If it doesn't, then it is indeed the connection with Illustrator which is working. If it is not anything from the things already discussed in this topic, then I think it is best to contact Enfocus Support about it.

Azrael113
Newbie
Posts: 10
Joined: Tue Jan 12, 2021 12:16 pm

Re: Illustrator configurator scripting

Post by Azrael113 » Thu Jan 14, 2021 1:39 pm

That sounds good.
I did that as described. First an Illustrator file, then a PDF file in the input folder.
But nothing happens.

I've also attached a screenshot. But our system is unfortunately in German.
Screenshot_Testflow.png
Screenshot_Testflow.png (87.7 KiB) Viewed 24 times

Padawan
Advanced member
Posts: 292
Joined: Mon Jun 12, 2017 8:48 pm
Location: Belgium
Contact:

Re: Illustrator configurator scripting

Post by Padawan » Fri Jan 15, 2021 11:39 am

If that doesn't work, then I think it is best to contact Enfocus Support.

Post Reply