Run at scheduled time

Post Reply
mlongo
Newbie
Posts: 11
Joined: Thu Nov 18, 2021 2:39 pm

Run at scheduled time

Post by mlongo »

I realize there is a Hold Job tool that I can leverage to have a flow run for example every 2 hours. But is there a scheduler tool or something similar to allow me to setup a flow to run at say every Mon, Wed and Fri at 8am and 1pm? Or maybe every day at specifically 6am and 6pm?
Thanks!
jan_suhr
Advanced member
Posts: 586
Joined: Fri Nov 04, 2011 1:12 pm
Location: Nyköping, Sweden

Re: Run at scheduled time

Post by jan_suhr »

On the Hold job configurator you can set that on the outgoing connection. You can have several connections from one hold job..

Look here:
https://www.enfocus.com/manuals/UserGui ... d_job.html
Jan Suhr
Color Consult AB
Sweden
=============
Check out my apps
mlongo
Newbie
Posts: 11
Joined: Thu Nov 18, 2021 2:39 pm

Re: Run at scheduled time

Post by mlongo »

jan_suhr wrote: Fri Dec 03, 2021 6:25 pm On the Hold job configurator you can set that on the outgoing connection. You can have several connections from one hold job..

Look here:
https://www.enfocus.com/manuals/UserGui ... d_job.html
Perfect! Thank you!
freddyp
Advanced member
Posts: 1008
Joined: Thu Feb 09, 2012 3:53 pm

Re: Run at scheduled time

Post by freddyp »

And there is also "Inject job": on the outgoing connection you can also trigger the creation of a dummy job at a certain time. When used in such a case you can leave out the incoming connection.
Post Reply