Hi, is it possible to log the length of a selected path as millimeters?
I tried the 'Check maximum path length' action, but I did not understand how to use it..
Select and log cut path length in millimeters
- magnussandstrom
- Advanced member
- Posts: 377
- Joined: Thu Jul 30, 2020 6:34 pm
- Location: Sweden
- Contact:
-
- Member
- Posts: 94
- Joined: Fri Jul 08, 2011 10:31 am
- Location: The Netherlands
Re: Select and log cut path length in millimeters
Hi Magnus,
Attached is an actionlist that i once received from Enfocus.
It uses checks if the dieline is less than 1mm.
If not, then it logs a warning containing the actual length.
Robert
Attached is an actionlist that i once received from Enfocus.
It uses checks if the dieline is less than 1mm.
If not, then it logs a warning containing the actual length.
Robert
- Attachments
-
- Line art length of spot color.zip
- (2.68 KiB) Downloaded 342 times
-
- Member
- Posts: 38
- Joined: Tue Jun 01, 2021 11:57 am
Re: Select and log cut path length in millimeters
Hi Magnus,
Here is my two script i use for Zund purpose.
The first one will check the total length line of specific spot colors.
The second one will count the number of element of specific spot colors.
Here is my two script i use for Zund purpose.
The first one will check the total length line of specific spot colors.
The second one will count the number of element of specific spot colors.
- magnussandstrom
- Advanced member
- Posts: 377
- Joined: Thu Jul 30, 2020 6:34 pm
- Location: Sweden
- Contact:
Re: Select and log cut path length in millimeters
Thanks, this works very good!
I also noticed that Pitstop ships with standard Action lists named 'Length of cutter guide...'
I also noticed that Pitstop ships with standard Action lists named 'Length of cutter guide...'
Re: Select and log cut path length in millimeters
The standard action lists seem to select any object with the spot colour. Not only the spot color assigned to the stroke which is required by most imposition software. So they need to be adjusted.