Fonts in “safety” area

Post Reply
CruzinCooler
Member
Posts: 39
Joined: Wed Aug 11, 2021 6:31 pm

Fonts in “safety” area

Post by CruzinCooler »

We create files with a Media size of 8.75 x 11.25. Green Lines
Trim size is 8.5 x 11 with a .125 Bleed all around. (8.75 x 11.25) Blue Lines
We set the Art box .25 smaller than Trim Box for our “text safety” area. Red Lines
Is there an action or check to see if there is any text falling in the “safety” region? Between the 8 x 10.5 and 8.5 x 11 region? Yellow
Well actually all I need is if there is any text outside the Art Box. I'm guessing outlined fonts wouldn't be detected nor graphics containing text.
Please see enclosed PDF.
Thank you in advance
Attachments
8.75x11.25Media_8.5x11Trim_.25Safety.jpg
8.75x11.25Media_8.5x11Trim_.25Safety.jpg (161.14 KiB) Viewed 1703 times
laurentd
Member
Posts: 137
Joined: Wed Mar 13, 2019 2:06 pm

Re: Fonts in “safety” area

Post by laurentd »

This action list will do what you want:
Select text outside of art box.png
Select text outside of art box.png (65.77 KiB) Viewed 1697 times
Laurent De Wilde, Solution Architect @ Enfocus
CruzinCooler
Member
Posts: 39
Joined: Wed Aug 11, 2021 6:31 pm

Re: Fonts in “safety” area

Post by CruzinCooler »

Thank you for your quick response. I appreciate it laurentd
Post Reply