Hi,
As topic says. Can PitStop automatically report images that contain areas < 3% and > 97 % ?
https://ibb.co/cXXq5xT
KR
Check images for flexo against burn-outs < 3%
-
- Newbie
- Posts: 11
- Joined: Tue Mar 29, 2022 10:59 am
-
- Member
- Posts: 121
- Joined: Wed Mar 22, 2017 5:05 pm
- Location: London, UK
- Contact:
Re: Check images for flexo against burn-outs < 3%
There's a standard action
Min Dot - Each Separation must be +5%
Dupe and set %
Min Dot - Each Separation must be +5%
Dupe and set %
-
- Newbie
- Posts: 11
- Joined: Tue Mar 29, 2022 10:59 am
Re: Check images for flexo against burn-outs < 3%
I haven't knew this one, much obliged.
I works in hightlights exacly as expected.
However for shadows it would need a checkbox sth like "Ignore 100%" - because only the dots between 96% and 99,9 are the real threat.
KR
I works in hightlights exacly as expected.
However for shadows it would need a checkbox sth like "Ignore 100%" - because only the dots between 96% and 99,9 are the real threat.
KR