Page 1 of 1
Select and log cut path length in millimeters
Posted: Fri Sep 09, 2022 9:45 pm
by magnussandstrom
Hi, is it possible to log the length of a selected path as millimeters?
I tried the 'Check maximum path length' action, but I did not understand how to use it..
Re: Select and log cut path length in millimeters
Posted: Mon Sep 12, 2022 7:55 am
by r.zegwaard
Hi Magnus,
Attached is an actionlist that i once received from Enfocus.
It uses checks if the dieline is less than 1mm.
If not, then it logs a warning containing the actual length.
Robert
Re: Select and log cut path length in millimeters
Posted: Mon Sep 12, 2022 9:52 am
by tdeschampsBluewest
Hi Magnus,
Here is my two script i use for Zund purpose.
The first one will check the total length line of specific spot colors.
The second one will count the number of element of specific spot colors.
- Zund.zip
- (12.35 KiB) Downloaded 465 times
Re: Select and log cut path length in millimeters
Posted: Tue Sep 13, 2022 9:36 pm
by magnussandstrom
Thanks, this works very good!
I also noticed that Pitstop ships with standard Action lists named 'Length of cutter guide...'
Re: Select and log cut path length in millimeters
Posted: Sat Feb 25, 2023 5:16 am
by jasonx
The standard action lists seem to select any object with the spot colour. Not only the spot color assigned to the stroke which is required by most imposition software. So they need to be adjusted.